Stucco Repair in Brevard County, FL
Pro Touch Painting repairs and coats stucco throughout Brevard County, FL — hairline and settlement crack repair, block joint sealing, spot priming and breathable or elastomeric masonry coatings — with most standalone repairs running roughly $450–$2,400 on a free written estimate.

Stucco Repair & Coating in Brevard County, FL
Almost every home in Brevard County is painted stucco over concrete block, and stucco is where Florida weather does its damage first. Wind-driven rain finds hairline cracks, slab settlement opens vertical seams at corners and window returns, and sun on south and west walls pulls old paint loose in sheets. Patching a crack and painting over it does not hold — the repair has to be cut, filled, cured and primed with the right material before any topcoat goes on. We do the repair and the coating with one crew, so there is no seam between who fixed the wall and who painted it.
- Hairline crazing, settlement cracks and drummy stucco
- Block joint and window-return sealing
- Texture matching: sand, dash, knockdown and smooth
- Elastomeric and breathable masonry coating systems
- Repair and repaint handled by one crew
How our stucco repair process works
Map the cracking
We walk every elevation and mark hairline crazing, structural cracks, hollow or drummy stucco and open block joints — and identify whether the cause is settlement, moisture or a failed prior repair.
Cut and fill
Cracks are opened to a sound edge, cleaned of loose material, and filled with a cementitious patch or flexible sealant depending on whether the crack still moves.
Texture match
Patches are floated and textured to match the surrounding wall — sand, dash, knockdown or smooth — so the repair disappears instead of ghosting through the paint.
Seal joints and penetrations
Block joints, window and door returns, hose bibs and light boxes are sealed with an elastomeric sealant so water stops entering behind the wall.
Prime and coat
Bare masonry gets a masonry primer or Loxon-grade conditioner, then a breathable acrylic or elastomeric finish rated for Florida sun and salt.
Stucco Repair by city in Brevard County
We deliver stucco repair across the Space Coast — pick your city for local details.
- Stucco Repair in Melbourne, FL
- Stucco Repair in Palm Bay, FL
- Stucco Repair in Viera, FL
- Stucco Repair in Rockledge, FL
- Stucco Repair in Cocoa, FL
- Stucco Repair in Merritt Island, FL
- Stucco Repair in Cocoa Beach, FL
- Stucco Repair in Satellite Beach, FL
- Stucco Repair in Indialantic, FL
- Stucco Repair in Titusville, FL
- Stucco Repair in West Melbourne, FL
- Stucco Repair in Suntree, FL
- Stucco Repair in Cape Canaveral, FL
- Stucco Repair in Indian Harbour Beach, FL
- Stucco Repair in Malabar, FL
- Stucco Repair in Grant-Valkaria, FL
- Stucco Repair in Port St. John, FL
- Stucco Repair in Mims, FL
- Stucco Repair in Melbourne Beach, FL
- Stucco Repair in Palm Shores, FL
- Stucco Repair in Melbourne Village, FL
- Stucco Repair in Barefoot Bay, FL
- Stucco Repair in Micco, FL
- Stucco Repair in Sharpes, FL
- Stucco Repair in Canaveral Groves, FL
- Stucco Repair in Port Canaveral, FL
What stucco repair costs and involves in Brevard County
Brevard County is one of the harshest coating environments in the country, and stucco repair here has to be planned around that. Salt carried inland off the Atlantic and the Indian River, relative humidity that sits near ninety percent for months, daily summer storms, and UV exposure that barely lets up in winter all shorten the service life of the wrong product. When a finish fails early on the Space Coast, the paint itself is rarely the cause — the surface underneath was not clean, dry, sound, and primed before the finish coats went on.
Every project starts with a walk-through and a written scope instead of a phone quote. We check the existing finish for adhesion, chalking, and mildew, look for moisture intrusion and hidden water damage, confirm the substrate, and list the repairs that must happen first: stucco cracking, hard or split caulk joints at windows and trim, soft fascia and soffit wood, drywall damage and nail pops, or slab grinding and moisture testing on floor coatings. Your estimate itemizes prep, products, coat counts, crew size, and timeline, so the number you approve is the number you pay.
Prep is the majority of the labor and the reason a repaint lasts eight to twelve years here rather than three. Exterior work gets a controlled wash, mildew treatment, stucco patching, full re-caulking, and spot priming over bare or chalky areas before two finish coats of premium 100% acrylic rated for coastal exposure — elastomeric where hairline cracking calls for it. Interior work gets furniture moved and covered, floors protected, patching sanded flat, stains sealed so they cannot bleed through, and hand-cut lines rather than tape alone. Cabinets are degreased, deglossed, and sprayed with a cabinet-grade finish; garage and patio floors are diamond-ground before any coating touches the concrete.
Pricing depends on square footage, substrate condition, coating system, and access — not on a flat per-foot guess. Most Brevard County homeowners want to know the range before they call, so our cost guides publish real local numbers, and our estimates break out prep so you can see exactly where the labor goes. Homes that have gone longer than a decade between repaints, or that sit east of US‑1 in the direct salt band, carry more prep and we say so up front instead of discovering it mid-project.
Crews are licensed, insured, background-checked, and based here on the Space Coast. You get one point of contact for the whole job, daily site cleanup rather than one push at the end, a final walk-through where anything you flag gets corrected before sign-off, and a written workmanship warranty. Free estimates are available countywide — Melbourne, Palm Bay, Viera, Suntree, Rockledge, Cocoa, Merritt Island, Cocoa Beach, Satellite Beach, Indialantic, West Melbourne, and Titusville — and every homeowner is welcome here, including LGBTQ+ families.
Stucco Repair questions, answered
- How much does stucco repair cost in Brevard County, FL?
- Most standalone stucco repairs in Brevard County run roughly $450–$2,400 depending on how many cracks there are, whether any stucco is drummy and has to be cut out, and how much texture matching is involved. When the repair is bundled into a full exterior repaint the cost is usually lower, because the crew, staging and masking are already on site. Every job gets a free written, itemized estimate first.
- Can you just repair the cracks without painting the whole house?
- Yes. We do standalone stucco repair. Be aware that a patched, primed area will not match the color of a sun-faded wall, so the repaired section will be visible until that elevation is repainted. Most homeowners either accept that or have us repaint the affected wall.
- How long does stucco repair take?
- Typical crack repair on a single-family Brevard home is one to two days of patching, then a cure period before coating — usually 24 to 72 hours depending on patch depth and humidity. Larger cut-out and re-stucco work adds a few days. Repair plus a full exterior repaint generally runs 4–7 working days.
- Do hairline stucco cracks actually need repair, or is paint enough?
- Hairline crazing under about 1/16 inch can often be bridged by an elastomeric coating alone. Anything wider, and any crack that runs from a window corner or up an elevation, is a water path and needs to be cut, filled and sealed first. Paint over an open crack fails within a season or two in Brevard's rain.
- What is elastomeric coating and does my Florida home need it?
- Elastomeric is a thick, flexible masonry coating that stretches over hairline movement instead of cracking with it. It suits older block and stucco walls with a history of crazing. It is not right for every house — a wall holding moisture needs a breathable acrylic instead, or the coating traps water and blisters. We tell you which one your walls call for and why.
- Do you handle stucco repair for HOA homes in Viera and Suntree?
- Yes. We work within HOA and architectural-review requirements in Viera, Suntree, Baytree and similar communities, including submitting the color and coating system for approval before we start.
- What causes stucco to sound hollow when tapped?
- Hollow or drummy stucco means the stucco has lost bond with the block or lath behind it, usually from long-term water intrusion. That section has to be cut out to sound material and re-stuccoed — patching over it just delays the failure. We test by tapping every elevation before quoting.
Free written estimate on your project
Call 207-812-1837 or send your project details — we walk the job, put the scope in writing, and start when you're ready.
