Pro Touch Painting installs epoxy floor coatings on garages, patios and pool decks throughout Brevard County, FL — concrete is ground or etched, patched and primed first so the coating bonds instead of peeling.
Bare Florida garage slabs stain, dust and hold moisture. An epoxy system seals the concrete into one glossy, easy-to-clean surface that shrugs off oil, hot tires and pool chemicals — and it's one of the most requested add-ons on Palm Bay and Viera projects.
The slab is mechanically profiled so the coating can key into the concrete instead of sitting on top of it.
Cracks, pits and spalled edges are filled, then a moisture-appropriate primer goes down.
Base coat, decorative flake if you want it, then a clear topcoat for gloss and abrasion resistance.
We give the system its full cure window before vehicles or furniture come back on it.
We deliver epoxy floors across the Space Coast — pick your city for local details.
Brevard County is one of the harshest coating environments in the country, and epoxy floors here has to be planned around that. Salt carried inland off the Atlantic and the Indian River, relative humidity that sits near ninety percent for months, daily summer storms, and UV exposure that barely lets up in winter all shorten the service life of the wrong product. When a finish fails early on the Space Coast, the paint itself is rarely the cause — the surface underneath was not clean, dry, sound, and primed before the finish coats went on.
Every project starts with a walk-through and a written scope instead of a phone quote. We check the existing finish for adhesion, chalking, and mildew, look for moisture intrusion and hidden water damage, confirm the substrate, and list the repairs that must happen first: stucco cracking, hard or split caulk joints at windows and trim, soft fascia and soffit wood, drywall damage and nail pops, or slab grinding and moisture testing on floor coatings. Your estimate itemizes prep, products, coat counts, crew size, and timeline, so the number you approve is the number you pay.
Prep is the majority of the labor and the reason a repaint lasts eight to twelve years here rather than three. Exterior work gets a controlled wash, mildew treatment, stucco patching, full re-caulking, and spot priming over bare or chalky areas before two finish coats of premium 100% acrylic rated for coastal exposure — elastomeric where hairline cracking calls for it. Interior work gets furniture moved and covered, floors protected, patching sanded flat, stains sealed so they cannot bleed through, and hand-cut lines rather than tape alone. Cabinets are degreased, deglossed, and sprayed with a cabinet-grade finish; garage and patio floors are diamond-ground before any coating touches the concrete.
Pricing depends on square footage, substrate condition, coating system, and access — not on a flat per-foot guess. Most Brevard County homeowners want to know the range before they call, so our cost guides publish real local numbers, and our estimates break out prep so you can see exactly where the labor goes. Homes that have gone longer than a decade between repaints, or that sit east of US‑1 in the direct salt band, carry more prep and we say so up front instead of discovering it mid-project.
Crews are licensed, insured, background-checked, and based here on the Space Coast. You get one point of contact for the whole job, daily site cleanup rather than one push at the end, a final walk-through where anything you flag gets corrected before sign-off, and a written 2-year workmanship warranty. Free estimates are available countywide — Melbourne, Palm Bay, Viera, Suntree, Rockledge, Cocoa, Merritt Island, Cocoa Beach, Satellite Beach, Indialantic, West Melbourne, and Titusville — and every homeowner is welcome here, including LGBTQ+ families.
Prep is the part of the job you never see once we are gone, and it is the only reason a finish lasts in Brevard County's heat, salt and humidity. This is the sequence we follow on every epoxy floors job — it is written into your estimate, not left to chance.
Florida slabs push moisture up from below. We test before quoting — a slab with high vapor drive needs a moisture-tolerant primer or the coating will bubble off in sheets.
The surface is mechanically ground, not acid-etched, with dust collection. Grinding opens the concrete profile so the epoxy keys in mechanically instead of sitting on the surface.
Old oil stains are dug out and treated. Epoxy will not bond through a saturated oil spot, and it always shows up as the first failure point.
Cracks, pitting and spalled edges are filled with a structural repair compound and ground flush.
Edges are cut in by hand and control joints are addressed so the finished floor has a clean, deliberate border rather than a ragged line at the wall.
We spec products for Florida exposure, not for the lowest material cost. Here is the system, layer by layer, and why each layer is there.
Primer
Bonds to freshly ground concrete and handles the vapor drive typical of Brevard slabs.
One
Base coat
High-build, no solvent shrinkage — the layer that gives the floor its impact and chemical resistance.
One
Flake
Hides slab imperfections, adds texture underfoot and lets you match the garage to the house.
Broadcast to rejection, then scraped and vacuumed
Topcoat
UV-stable so it does not amber at the open garage door, and hot-tire-pickup resistant — the failure mode cheap kits are known for.
One to two
Epoxy garage floors are quoted by slab square footage and slab condition. Our minimum project is $2,800, which covers a standard two-car garage in sound condition.
One-car, two-car, three-car and oversized slabs each change the material volume and the grinding time.
Cracks, spalling, pitting and old coating that has to be ground off all add prep hours before any epoxy goes down.
A slab that tests high needs a moisture-mitigating primer system.
Light broadcast versus full-broadcast-to-rejection changes both material and labor.
Polyaspartic cures faster and holds gloss longer than a standard urethane clear.
Cove base up the wall, a second bay, or moving heavy shelving and vehicles are quoted as their own lines.
Real homes and businesses on the Space Coast — drag the sliders to see the same room or wall before and after our epoxy floors work.
After
Before
After
Before
Exactly what was prepped, primed and coated on recent jobs — the same detail that goes in your written estimate.
Epoxy floors · Rockledge, FL
The slab was diamond-ground rather than acid-etched, oil stains were cut out and patched, and a moisture-tolerant primer went down first. Base coat, gray flake broadcast to rejection, then a clear topcoat for hot-tire and chemical resistance.
Epoxy floors · Bayside Lakes, Palm Bay, FL
Cracks and spalled edges were routed, filled and sanded flush before grinding the whole slab. A blue-gray flake system was installed with a clear urethane topcoat — foot traffic the next day, vehicles after three.
Epoxy floors · Cape Canaveral, FL
The slab was diamond-ground, oil stains cut out and patched, and a moisture-tolerant primer applied. A gray-blue flake system was broadcast to rejection and sealed with a clear topcoat for hot-tire resistance — vehicles back in after three days.
August 2026
We walk the job, measure it, and put the full scope — prep, products and coats — in writing before anyone picks up a brush. No pressure, no obligation, and you keep the estimate either way.
Pre-qualify in minutes with Acorn Finance and compare affordable monthly payment plans from multiple lenders — no impact to your credit score to check your offers. Bring your Pro Touch Painting estimate and Acorn helps you spread the cost over time.
Pre-qualify nowFinancing provided by third-party lenders through Acorn Finance. Pro Touch Painting does not lend or make credit decisions.
Call 207-812-1837 or send your project details — we walk the job, put the scope in writing, and start when you're ready.
Real estate & value
How Brevard County assesses property condition, and which painting projects actually move appraised value and buyer perception on the Space Coast.
Read the guideLicensing & consumer
How to verify a Brevard County painting contractor before you pay a deposit — insurance, consumer complaint records, and how to read directory listings and review profiles.
Read the guide