Pro Touch Painting provides epoxy floors in West Melbourne, FL with licensed, insured Brevard County crews. We inspect and prepare the surface, specify the coating system in writing, and provide a free itemized estimate. Pro Touch Painting installs epoxy floor coatings on garages, patios and pool decks throughout Brevard County, FL — concrete is ground or etched, patched and primed first so the coating bonds instead of peeling.
West Melbourne is full of newer subdivisions where builder-grade paint and oak or maple cabinets are the two things homeowners most want changed. Cabinet refinishing here gives a new-kitchen look for a fraction of a remodel.
Bare Florida garage slabs stain, dust and hold moisture. An epoxy system seals the concrete into one glossy, easy-to-clean surface that shrugs off oil, hot tires and pool chemicals — and it's one of the most requested add-ons on Palm Bay and Viera projects.
We degrease, sand, prime and spray cabinet doors for a factory-smooth finish that resists chipping.
We provide written color and product details so West Melbourne HOA approvals go through cleanly.
Epoxy floors in West Melbourne is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in West Melbourne almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our West Melbourne crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written 2-year warranty on workmanship. Free estimates are available across West Melbourne and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
The slab is mechanically profiled so the coating can key into the concrete instead of sitting on top of it.
Cracks, pits and spalled edges are filled, then a moisture-appropriate primer goes down.
Base coat, decorative flake if you want it, then a clear topcoat for gloss and abrasion resistance.
We give the system its full cure window before vehicles or furniture come back on it.
Photographed on real West Melbourne jobs — same crew, same prep standards.
What was actually prepped, primed and coated — the same detail that goes in your written estimate.
Epoxy floors · Rockledge, FL
The slab was diamond-ground rather than acid-etched, oil stains were cut out and patched, and a moisture-tolerant primer went down first. Base coat, gray flake broadcast to rejection, then a clear topcoat for hot-tire and chemical resistance.
Epoxy floors · Bayside Lakes, Palm Bay, FL
Cracks and spalled edges were routed, filled and sanded flush before grinding the whole slab. A blue-gray flake system was installed with a clear urethane topcoat — foot traffic the next day, vehicles after three.
Prep is the part of the job you never see once we are gone, and it is the only reason a finish lasts in Brevard County's heat, salt and humidity. This is the sequence we follow on every epoxy floors job — it is written into your estimate, not left to chance.
Florida slabs push moisture up from below. We test before quoting — a slab with high vapor drive needs a moisture-tolerant primer or the coating will bubble off in sheets.
The surface is mechanically ground, not acid-etched, with dust collection. Grinding opens the concrete profile so the epoxy keys in mechanically instead of sitting on the surface.
Old oil stains are dug out and treated. Epoxy will not bond through a saturated oil spot, and it always shows up as the first failure point.
Cracks, pitting and spalled edges are filled with a structural repair compound and ground flush.
Edges are cut in by hand and control joints are addressed so the finished floor has a clean, deliberate border rather than a ragged line at the wall.
We spec products for Florida exposure, not for the lowest material cost. Here is the system, layer by layer, and why each layer is there.
Primer
Bonds to freshly ground concrete and handles the vapor drive typical of Brevard slabs.
One
Base coat
High-build, no solvent shrinkage — the layer that gives the floor its impact and chemical resistance.
One
Flake
Hides slab imperfections, adds texture underfoot and lets you match the garage to the house.
Broadcast to rejection, then scraped and vacuumed
Topcoat
UV-stable so it does not amber at the open garage door, and hot-tire-pickup resistant — the failure mode cheap kits are known for.
One to two
Epoxy garage floors are quoted by slab square footage and slab condition. Our minimum project is $2,800, which covers a standard two-car garage in sound condition.
One-car, two-car, three-car and oversized slabs each change the material volume and the grinding time.
Cracks, spalling, pitting and old coating that has to be ground off all add prep hours before any epoxy goes down.
A slab that tests high needs a moisture-mitigating primer system.
Light broadcast versus full-broadcast-to-rejection changes both material and labor.
Polyaspartic cures faster and holds gloss longer than a standard urethane clear.
Cove base up the wall, a second bay, or moving heavy shelving and vehicles are quoted as their own lines.
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Real estate & value
How Brevard County assesses property condition, and which painting projects actually move appraised value and buyer perception on the Space Coast.
Read the guideLicensing & consumer
How to verify a Brevard County painting contractor before you pay a deposit — insurance, consumer complaint records, and how to read directory listings and review profiles.
Read the guide