Epoxy Floors in Port St. John, FL
Pro Touch Painting installs epoxy floor coatings on garages, patios and pool decks throughout Brevard County, FL — concrete is ground or etched, patched and primed first so the coating bonds instead of peeling.
Why Port St. John homes need epoxy floors done right
Port St. John is a large neighborhood of 1970s-to-1990s block homes between Titusville and Cocoa, backing onto the Indian River and Fay Lake. Most exteriors here are painted stucco over block that has been recoated several times, so the real work is removing failing paint, repairing hairline cracks and priming before the topcoat. Inside, popcorn-era ceilings, oak cabinets and dated builder colors are the most common repaint requests.
Bare Florida garage slabs stain, dust and hold moisture. An epoxy system seals the concrete into one glossy, easy-to-clean surface that shrugs off oil, hot tires and pool chemicals — and it's one of the most requested add-ons on Palm Bay and Viera projects.
Repainted block exteriors
Multiple old coats fail together. We remove what is loose, repair cracks and prime bare block so the new finish bonds.
River and lake humidity
Homes near the Indian River and Fay Lake see mildew on shaded walls — cleaned and treated before any coating goes on.
Oak kitchens and dated interiors
Cabinet refinishing and a full interior repaint are the fastest way to modernize these homes without remodeling.
How we approach epoxy floors in Port St. John, Florida
Epoxy floors in Port St. John is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in Port St. John almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our Port St. John crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written warranty on workmanship. Free estimates are available across Port St. John and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
Our epoxy floors process in Port St. John
- Step 1
Grind or etch
The slab is mechanically profiled so the coating can key into the concrete instead of sitting on top of it.
- Step 2
Patch and prime
Cracks, pits and spalled edges are filled, then a moisture-appropriate primer goes down.
- Step 3
Build the coating
Base coat, decorative flake if you want it, then a clear topcoat for gloss and abrasion resistance.
- Step 4
Cure and return
We give the system its full cure window before vehicles or furniture come back on it.
- Garages, patios, lanais and pool decks
- Flake and solid-color finishes
- Chlorine-, UV- and hot-tire resistant systems
- Textured non-slip options for wet areas
Epoxy Floors neighborhoods in Port St. John
- Fay Boulevard corridor
- Fay Lake
- Kings Highway area
- Curtis Boulevard
- Canaveral Groves side
Epoxy Floors in Port St. John — questions
- Do you offer epoxy floors in Port St. John, FL?
- Yes. Pro Touch Painting serves Port St. John and the surrounding Brevard County area with licensed, insured crews. Call 207-812-1837 for a free written estimate.
- How much does an epoxy garage floor cost in Brevard County?
- Most two-car garage epoxy floors in Brevard County run roughly $2,800–$4,750, with a $2,800 minimum per floor, depending on slab condition, prep needed and whether you choose flake or a clear topcoat. Estimates are free and written.
- How long before I can park on a new epoxy floor?
- Foot traffic is usually fine after about 24 hours and vehicles after 3–5 days, depending on the product and Florida humidity at the time of install.
- Can epoxy be used on a pool deck?
- Yes — with a textured, non-slip, UV-stable system chosen for wet, chlorinated, full-sun conditions. That's a different build than a garage floor.
Free epoxy floors estimate in Port St. John
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Other services in Port St. John, FL
Rated 5.0 by Port St. John homeowners
- Business
- Pro Touch Painting
- Phone
- 207-812-1837
- Service area
- Port St. John, FL & all of Brevard County
- Hours
- Open daily, 6am – 10pm