Epoxy Floors in Melbourne Beach, FL
Pro Touch Painting installs epoxy floor coatings on garages, patios and pool decks throughout Brevard County, FL — concrete is ground or etched, patched and primed first so the coating bonds instead of peeling.
Why Melbourne Beach homes need epoxy floors done right
Melbourne Beach sits on the barrier island between the Atlantic and the Indian River, so every exterior here fights salt spray, UV and wind-driven rain. Older beach cottages off Ocean Avenue have wood siding, fascia and railings that need scraping, rot repair and full priming, while newer stucco and block homes along Riverside Drive mostly need a thorough wash, mildew treatment and a high-grade acrylic or elastomeric topcoat. Inside, we repaint everything from small cottage interiors to two-story oceanfront great rooms, and we finish garage floors so they stop sweating and staining.
Bare Florida garage slabs stain, dust and hold moisture. An epoxy system seals the concrete into one glossy, easy-to-clean surface that shrugs off oil, hot tires and pool chemicals — and it's one of the most requested add-ons on Palm Bay and Viera projects.
Direct salt-air exposure
Ocean-facing walls, railings and doors are washed, rinsed of chlorides and coated with products rated for coastal exposure so the finish lasts.
Wood cottages and trim
Beach cottages need scraping, wood rot repair, spot priming and caulking before paint — otherwise the finish lifts within a season.
Storm and wind-driven rain
Exterior work is scheduled around the daily storm window so every coat cures fully before the next band of weather.
How we approach epoxy floors in Melbourne Beach, Florida
Epoxy floors in Melbourne Beach is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in Melbourne Beach almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our Melbourne Beach crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written warranty on workmanship. Free estimates are available across Melbourne Beach and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
Our epoxy floors process in Melbourne Beach
- Step 1
Grind or etch
The slab is mechanically profiled so the coating can key into the concrete instead of sitting on top of it.
- Step 2
Patch and prime
Cracks, pits and spalled edges are filled, then a moisture-appropriate primer goes down.
- Step 3
Build the coating
Base coat, decorative flake if you want it, then a clear topcoat for gloss and abrasion resistance.
- Step 4
Cure and return
We give the system its full cure window before vehicles or furniture come back on it.
- Garages, patios, lanais and pool decks
- Flake and solid-color finishes
- Chlorine-, UV- and hot-tire resistant systems
- Textured non-slip options for wet areas
Epoxy Floors neighborhoods in Melbourne Beach
- Ocean Avenue village
- Riverside Drive
- Spanish Oaks
- Sunnyland Beach
- Floridana Beach
- Ocean Beach Villas
- Turtle Bay
- South Beaches A1A corridor
Epoxy Floors in Melbourne Beach — questions
- Do you offer epoxy floors in Melbourne Beach, FL?
- Yes. Pro Touch Painting serves Melbourne Beach and the surrounding Brevard County area with licensed, insured crews. Call 207-812-1837 for a free written estimate.
- How much does an epoxy garage floor cost in Brevard County?
- Most two-car garage epoxy floors in Brevard County run roughly $2,800–$4,750, with a $2,800 minimum per floor, depending on slab condition, prep needed and whether you choose flake or a clear topcoat. Estimates are free and written.
- How long before I can park on a new epoxy floor?
- Foot traffic is usually fine after about 24 hours and vehicles after 3–5 days, depending on the product and Florida humidity at the time of install.
- Can epoxy be used on a pool deck?
- Yes — with a textured, non-slip, UV-stable system chosen for wet, chlorinated, full-sun conditions. That's a different build than a garage floor.
Free epoxy floors estimate in Melbourne Beach
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Other services in Melbourne Beach, FL
Rated 5.0 by Melbourne Beach homeowners
- Business
- Pro Touch Painting
- Phone
- 207-812-1837
- Service area
- Melbourne Beach, FL & all of Brevard County
- Hours
- Open daily, 6am – 10pm