Stucco Repair in Mims, FL
Pro Touch Painting repairs and coats stucco throughout Brevard County, FL — hairline and settlement crack repair, block joint sealing, spot priming and breathable or elastomeric masonry coatings — with most standalone repairs running roughly $450–$2,400 on a free written estimate.
Why Mims homes need stucco repair done right
Mims is north Brevard's rural edge, with acreage homes, older frame houses and citrus-country properties north of Titusville. Homes here are often further from the coast but still get heavy summer rain, deep shade and well-water irrigation. Prep is the whole job: wash, treat mildew, repair wood, prime, then coat with products that handle Florida sun and rain without early failure.
Almost every home in Brevard County is painted stucco over concrete block, and stucco is where Florida weather does its damage first. Wind-driven rain finds hairline cracks, slab settlement opens vertical seams at corners and window returns, and sun on south and west walls pulls old paint loose in sheets. Patching a crack and painting over it does not hold — the repair has to be cut, filled, cured and primed with the right material before any topcoat goes on. We do the repair and the coating with one crew, so there is no seam between who fixed the wall and who painted it.
Rural acreage properties
House, garage, shed and fence can be quoted together so one visit covers the whole property.
Deep shade and heavy rain
Mildew-prone walls are cleaned and treated, and exterior work is scheduled around the daily storm window so coatings cure.
Older frame homes
Wood siding, fascia and soffits get scraping, rot repair and full priming before finish coats go on.
How we approach stucco repair in Mims, Florida
Stucco repair in Mims is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in Mims almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our Mims crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written warranty on workmanship. Free estimates are available across Mims and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
Our stucco repair process in Mims
- Step 1
Map the cracking
We walk every elevation and mark hairline crazing, structural cracks, hollow or drummy stucco and open block joints — and identify whether the cause is settlement, moisture or a failed prior repair.
- Step 2
Cut and fill
Cracks are opened to a sound edge, cleaned of loose material, and filled with a cementitious patch or flexible sealant depending on whether the crack still moves.
- Step 3
Texture match
Patches are floated and textured to match the surrounding wall — sand, dash, knockdown or smooth — so the repair disappears instead of ghosting through the paint.
- Step 4
Seal joints and penetrations
Block joints, window and door returns, hose bibs and light boxes are sealed with an elastomeric sealant so water stops entering behind the wall.
- Step 5
Prime and coat
Bare masonry gets a masonry primer or Loxon-grade conditioner, then a breathable acrylic or elastomeric finish rated for Florida sun and salt.
- Hairline crazing, settlement cracks and drummy stucco
- Block joint and window-return sealing
- Texture matching: sand, dash, knockdown and smooth
- Elastomeric and breathable masonry coating systems
- Repair and repaint handled by one crew
Stucco Repair neighborhoods in Mims
- US-1 corridor
- Hammock Road
- Indian River Drive
- Scottsmoor side
- Turnbull Bay area
Stucco Repair in Mims — questions
- Do you offer stucco repair in Mims, FL?
- Yes. Pro Touch Painting serves Mims and the surrounding Brevard County area with licensed, insured crews. Call 207-812-1837 for a free written estimate.
- How much does stucco repair cost in Brevard County, FL?
- Most standalone stucco repairs in Brevard County run roughly $450–$2,400 depending on how many cracks there are, whether any stucco is drummy and has to be cut out, and how much texture matching is involved. When the repair is bundled into a full exterior repaint the cost is usually lower, because the crew, staging and masking are already on site. Every job gets a free written, itemized estimate first.
- Can you just repair the cracks without painting the whole house?
- Yes. We do standalone stucco repair. Be aware that a patched, primed area will not match the color of a sun-faded wall, so the repaired section will be visible until that elevation is repainted. Most homeowners either accept that or have us repaint the affected wall.
- How long does stucco repair take?
- Typical crack repair on a single-family Brevard home is one to two days of patching, then a cure period before coating — usually 24 to 72 hours depending on patch depth and humidity. Larger cut-out and re-stucco work adds a few days. Repair plus a full exterior repaint generally runs 4–7 working days.
- Do hairline stucco cracks actually need repair, or is paint enough?
- Hairline crazing under about 1/16 inch can often be bridged by an elastomeric coating alone. Anything wider, and any crack that runs from a window corner or up an elevation, is a water path and needs to be cut, filled and sealed first. Paint over an open crack fails within a season or two in Brevard's rain.
- What is elastomeric coating and does my Florida home need it?
- Elastomeric is a thick, flexible masonry coating that stretches over hairline movement instead of cracking with it. It suits older block and stucco walls with a history of crazing. It is not right for every house — a wall holding moisture needs a breathable acrylic instead, or the coating traps water and blisters. We tell you which one your walls call for and why.
- Do you handle stucco repair for HOA homes in Viera and Suntree?
- Yes. We work within HOA and architectural-review requirements in Viera, Suntree, Baytree and similar communities, including submitting the color and coating system for approval before we start.
- What causes stucco to sound hollow when tapped?
- Hollow or drummy stucco means the stucco has lost bond with the block or lath behind it, usually from long-term water intrusion. That section has to be cut out to sound material and re-stuccoed — patching over it just delays the failure. We test by tapping every elevation before quoting.
Free stucco repair estimate in Mims
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Other services in Mims, FL
Rated 5.0 by Mims homeowners
- Business
- Pro Touch Painting
- Phone
- 207-812-1837
- Service area
- Mims, FL & all of Brevard County
- Hours
- Open daily, 6am – 10pm