Exterior Painting in Melbourne, FL
Pro Touch Painting repaints home exteriors across Brevard County, FL — stucco, concrete block, wood trim and coastal beachside homes — using UV-stable, salt-air-rated coatings applied at full film thickness.
Why Melbourne homes need exterior painting done right
Melbourne homes range from mid-century block ranches near downtown and Eau Gallie to newer stucco builds off Wickham Road, plus riverfront properties along the Indian River. Each needs a different prep approach — older block walls need crack repair and elastomeric-grade coatings, while newer stucco mostly needs proper cleaning and a quality acrylic topcoat. Inside, we repaint everything from 1960s plaster walls to two-story great rooms in Suntree and Baytree.
Sun, salt air and daily summer storms are hard on Space Coast exteriors. Paint here lasts 5–8 years on stucco and block, and closer to 4–6 years beachside. What separates a repaint that holds from one that chalks in two seasons is washing, crack repair and priming — not the color.
Salt air off the Indian River
Homes east of US-1 see faster chalking and fading. We spec exterior coatings rated for coastal exposure and prime bare spots before topcoating.
Afternoon summer storms
We schedule exterior work around Melbourne's daily storm window so coatings cure properly instead of washing out.
1960s–70s block ranches
Downtown and Eau Gallie homes need stucco crack repair, spot priming and a breathable masonry coating — not just a fresh color over failing paint.
Honey oak kitchens near Wickham
Cabinet refinishing is our most requested Melbourne interior job. Doors are degreased, sanded, primed and sprayed for a factory-smooth finish.
How we approach exterior painting in Melbourne, Florida
Exterior painting in Melbourne is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in Melbourne almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our Melbourne crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written warranty on workmanship. Free estimates are available across Melbourne and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
Our exterior painting process in Melbourne
- Step 1
Wash and treat
Pressure washing plus mildew treatment removes salt residue, chalk and organic growth so coatings can bond.
- Step 2
Repair and caulk
Hairline stucco cracks are sealed, wood trim is scraped and spot-primed, and joints are caulked against wind-driven rain.
- Step 3
Prime bare spots
Bare, chalked or rusted areas get the right primer — we never topcoat a failing surface.
- Step 4
Coat and detail
Walls, fascia, soffits, garage and front doors are finished, then landscaping and hardscape are cleared and cleaned.
- Coastal-rated coatings for beachside homes
- HOA color documentation for Viera and West Melbourne
- Work scheduled around afternoon storm windows
- Landscaping, pavers and pools fully masked
Exterior Painting neighborhoods in Melbourne
- Downtown Melbourne
- Eau Gallie
- Suntree
- Baytree
- Sherwood Park
- Lansing Island
- Melbourne Beach
- Palm Shores
- Crane Creek
- Wickham Road corridor
Exterior Painting in Melbourne — questions
- Do you offer exterior painting in Melbourne, FL?
- Yes. Pro Touch Painting serves Melbourne and the surrounding Brevard County area with licensed, insured crews. Call 207-812-1837 for a free written estimate.
- How often should a Florida home be repainted outside?
- In Brevard County, expect 5–8 years on stucco and concrete block, and 4–6 years on barrier-island homes exposed to direct salt spray.
- Do you handle HOA color approvals?
- Yes. We provide written color and product documentation for Viera, Suntree and West Melbourne architectural reviews so approvals go through without delays.
- Is pressure washing included with exterior painting?
- Yes. Washing and mildew treatment are part of every exterior repaint — painting over salt or mildew is the main reason coastal repaints fail early.
Free exterior painting estimate in Melbourne
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Other services in Melbourne, FL
Rated 5.0 by Melbourne homeowners
- Business
- Pro Touch Painting
- Phone
- 207-812-1837
- Service area
- Melbourne, FL & all of Brevard County
- Hours
- Open daily, 6am – 10pm