Pressure Washing in Melbourne, FL
Pro Touch Painting pressure washes and soft-washes exteriors throughout Brevard County, FL — driveways, walks, siding, stucco, pool decks and fences — matching the method to each surface so it's clean without damage.
Why Melbourne homes need pressure washing done right
Melbourne homes range from mid-century block ranches near downtown and Eau Gallie to newer stucco builds off Wickham Road, plus riverfront properties along the Indian River. Each needs a different prep approach — older block walls need crack repair and elastomeric-grade coatings, while newer stucco mostly needs proper cleaning and a quality acrylic topcoat. Inside, we repaint everything from 1960s plaster walls to two-story great rooms in Suntree and Baytree.
Pressure washing is the first step of a lasting paint job, and it's a service we offer on its own. We match the method to the surface — a low-pressure soft wash for stucco and siding to protect the finish, calibrated higher pressure for concrete — and rinse down to a clean surface that's ready to coat or just looks new again.
Salt air off the Indian River
Homes east of US-1 see faster chalking and fading. We spec exterior coatings rated for coastal exposure and prime bare spots before topcoating.
Afternoon summer storms
We schedule exterior work around Melbourne's daily storm window so coatings cure properly instead of washing out.
1960s–70s block ranches
Downtown and Eau Gallie homes need stucco crack repair, spot priming and a breathable masonry coating — not just a fresh color over failing paint.
Honey oak kitchens near Wickham
Cabinet refinishing is our most requested Melbourne interior job. Doors are degreased, sanded, primed and sprayed for a factory-smooth finish.
How we approach pressure washing in Melbourne, Florida
Pressure washing in Melbourne is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in Melbourne almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our Melbourne crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written warranty on workmanship. Free estimates are available across Melbourne and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
Our pressure washing process in Melbourne
- Step 1
Assess the surface
Stucco, vinyl, concrete, pavers or wood each get a different pressure and detergent — we set the method before we start.
- Step 2
Pre-treat stains
Degreasers on oil spots and mildew killers on shaded, damp areas go down ahead of the wash.
- Step 3
Soft wash or pressure wash
Low-pressure soft wash on siding and stucco; calibrated pressure on driveways, walks and pavers.
- Step 4
Rinse and inspect
We rinse to a clean surface and flag any paint failure or caulk gaps that need follow-up before coating.
- Driveways, walkways and pavers
- Soft-wash stucco, vinyl and wood siding
- Pool decks, lanais and fences
- Paint-prep washing for exterior repaints
Pressure Washing neighborhoods in Melbourne
- Downtown Melbourne
- Eau Gallie
- Suntree
- Baytree
- Sherwood Park
- Lansing Island
- Melbourne Beach
- Palm Shores
- Crane Creek
- Wickham Road corridor
Pressure Washing in Melbourne — questions
- Do you offer pressure washing in Melbourne, FL?
- Yes. Pro Touch Painting serves Melbourne and the surrounding Brevard County area with licensed, insured crews. Call 207-812-1837 for a free written estimate.
- Do you pressure wash before painting?
- Yes — pressure washing is step one of every exterior repaint we do. A clean, dry substrate is what makes the coating last.
- Can I hire pressure washing without a paint job?
- Yes. Pressure washing is a standalone service — driveways, house exteriors, pool decks and fences — with no paint work required.
- Will high pressure damage my stucco or siding?
- No. We soft-wash stucco, vinyl and painted siding at low pressure with the right detergent. Higher pressure is only used on concrete, pavers and similar hard surfaces.
- How much does pressure washing cost in Brevard County?
- Pricing is by square footage and surface type, with a free written estimate. Bundling a wash with an exterior repaint usually lowers the combined cost.
- Do you clean pool decks and lanais?
- Yes — we use a non-slip-safe, chlorine-tolerant approach on pool decks and lanais so the surface is clean and safe to walk on.
Free pressure washing estimate in Melbourne
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Other services in Melbourne, FL
Rated 5.0 by Melbourne homeowners
- Business
- Pro Touch Painting
- Phone
- 207-812-1837
- Service area
- Melbourne, FL & all of Brevard County
- Hours
- Open daily, 6am – 10pm