Pro Touch Painting provides drywall repair in Melbourne, FL with licensed, insured Brevard County crews. We inspect and prepare the surface, specify the coating system in writing, and provide a free itemized estimate. Pro Touch Painting repairs drywall throughout Brevard County, FL — water damage, settlement cracks, nail pops, anchor holes and full texture matching — so walls are paint-ready and the repair disappears under the finish coat.
Melbourne homes range from mid-century block ranches near downtown and Eau Gallie to newer stucco builds off Wickham Road, plus riverfront properties along the Indian River. Each needs a different prep approach — older block walls need crack repair and elastomeric-grade coatings, while newer stucco mostly needs proper cleaning and a quality acrylic topcoat. Inside, we repaint everything from 1960s plaster walls to two-story great rooms in Suntree and Baytree.
Florida homes take a beating: humidity, seasonal storms, settling slabs and everyday wear all leave marks on drywall. We patch, seam and texture-match so the repair is invisible once painted. Because we are painters, we handle the repair and the finish in one crew — no handoff gap, no visible patch line, and the wall is ready for a clean topcoat the same day the mud dries.
Homes east of US-1 see faster chalking and fading. We spec exterior coatings rated for coastal exposure and prime bare spots before topcoating.
We schedule exterior work around Melbourne's daily storm window so coatings cure properly instead of washing out.
Downtown and Eau Gallie homes need stucco crack repair, spot priming and a breathable masonry coating — not just a fresh color over failing paint.
Cabinet refinishing is our most requested Melbourne interior job. Doors are degreased, sanded, primed and sprayed for a factory-smooth finish.
Drywall repair in Melbourne is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in Melbourne almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our Melbourne crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written 2-year warranty on workmanship. Free estimates are available across Melbourne and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
We walk the walls, find every spot, and trace water intrusion or structural cause before patching so the repair doesn't recur.
Dust containment, floor and furniture protection, and cutting damaged board out to clean, square edges.
Replace board where needed, bed tape, mud in feathered coats, and sand smooth to the surrounding wall.
Orange peel, knockdown, skip-trowel or smooth — matched to the existing wall so the patch blends.
We seal the repair with primer so the topcoat blends with no flashing or dull spots.
Photographed on real Melbourne jobs — same crew, same prep standards.
After
Before
What was actually prepped, primed and coated — the same detail that goes in your written estimate.
Drywall repair · Melbourne Beach, FL
Nail pops, seam cracks and a small water-stained ceiling patch were cut out, re-taped and skim-coated, then the texture was matched by hand. Stains were sealed with a stain-blocking primer before the ceiling was rolled bright white and the walls finished in a warm greige eggshell.
August 2026
Prep is the part of the job you never see once we are gone, and it is the only reason a finish lasts in Brevard County's heat, salt and humidity. This is the sequence we follow on every drywall repair job — it is written into your estimate, not left to chance.
A ceiling stain or a recurring crack usually has a source. We check for active leaks and framing movement before closing anything up.
Damaged and water-softened board is cut out to the nearest framing so the patch has something solid to fasten to.
Patches are taped and floated in multiple thin coats, each sanded, so the repair reads flat rather than as a bump under a raking light.
Knockdown, orange peel and smooth finishes are matched to the existing wall or ceiling before primer.
Fresh compound absorbs differently than the surrounding wall; priming the patch is what stops the flashed halo after painting.
We spec products for Florida exposure, not for the lowest material cost. Here is the system, layer by layer, and why each layer is there.
Board
Keeps the plane flat and stands up to bath and laundry humidity.
—
Compound
Setting compound for the fill coats so it does not shrink; all-purpose for the finish coats so it sands clean.
Three thin coats
Texture
An invisible repair depends on the texture match more than on the paint.
One
Primer
Evens out porosity and blocks any remaining water staining.
One
Drywall repair is quoted by the number and size of repairs and by how hard the texture is to match.
A few anchor holes is a short visit; a water-damaged ceiling section is a multi-day sequence with dry time between coats.
Knockdown and heavy textures take more passes to blend than smooth walls.
Ceiling work is slower and needs more protection below.
Repairs are usually blended into a full wall or full ceiling repaint so there is no visible patch outline.
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Storm & climate
How Brevard's storm season and salt air change the timing, prep and coatings for an exterior repaint — with the local forecast office as the reference point.
Read the guideLicensing & consumer
How to verify a Brevard County painting contractor before you pay a deposit — insurance, consumer complaint records, and how to read directory listings and review profiles.
Read the guidePairs with drywall repair
Patched drywall has to be primed and coated to disappear. Repair and repaint belong in one scope.
See interior paintingLocal spotlight
Pricing, timelines and recent drywall repair projects for West Melbourne homeowners.
View West Melbourne page