Pro Touch Painting provides exterior painting in June Park, FL with licensed, insured Brevard County crews. We inspect and prepare the surface, specify the coating system in writing, and provide a free itemized estimate. Pro Touch Painting repaints home exteriors across Brevard County, FL — stucco, concrete block, wood trim and coastal beachside homes — using UV-stable, salt-air-rated coatings applied at full film thickness.
June Park sits just west of Melbourne along US-192 between West Melbourne and Palm Bay, an established area of 1960s–1980s block homes on generous lots. Most exteriors here are on their second or third repaint, which means the real work is removing chalky failing paint, filling stucco cracks and priming bare block so the new coating actually bonds. Interiors are typically dated flat paint and honey-oak kitchens, both of which we handle without a remodel.
Sun, salt air and daily summer storms are hard on Space Coast exteriors. Paint here lasts 5–8 years on stucco and block, and closer to 4–6 years beachside. What separates a repaint that holds from one that chalks in two seasons is washing, crack repair and priming — not the color.
Older coatings powder off in the sun, so walls are washed until chalk stops transferring and bare block is primed before topcoating — skipping that step is why repaints peel.
Wall repaints in washable finishes plus cabinet refinishing update a June Park home for a fraction of a kitchen remodel, which is the most requested combination here.
Exterior painting in June Park is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in June Park almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our June Park crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written 2-year warranty on workmanship. Free estimates are available across June Park and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
Pressure washing plus mildew treatment removes salt residue, chalk and organic growth so coatings can bond.
Hairline stucco cracks are sealed, wood trim is scraped and spot-primed, and joints are caulked against wind-driven rain.
Bare, chalked or rusted areas get the right primer — we never topcoat a failing surface.
Walls, fascia, soffits, garage and front doors are finished, then landscaping and hardscape are cleared and cleaned.
What was actually prepped, primed and coated — the same detail that goes in your written estimate.
Exterior painting · Viera East, Viera, FL
Full exterior wash, stucco crack repair and re-caulking at windows and trim, spot priming on bare areas, then two coats of a UV-stable exterior acrylic. Color and product sheets were provided for HOA architectural review before we started.
Exterior painting · Port Malabar, Palm Bay, FL
Sun-faded south and west walls were washed, hairline stucco cracks were filled and sealed, and bare block was primed. The body color was changed completely, which took an extra coat to cover evenly, and trim and the front door were finished last.
Prep is the part of the job you never see once we are gone, and it is the only reason a finish lasts in Brevard County's heat, salt and humidity. This is the sequence we follow on every exterior painting job — it is written into your estimate, not left to chance.
Every wall, soffit and eave is washed at controlled pressure, with a mildewcide on the shaded north walls and under overhangs where Brevard's humidity grows a film that paint will not stick to.
South and west walls chalk under Florida UV. Loose and chalky coating is scraped and sanded back to sound material — if chalk stays, the new coat peels with it.
Hairline cracks are opened, filled and textured to match; larger cracks get a flexible patching compound so movement does not reopen them the next hot season.
Rotted fascia, soffit and trim is replaced before finish work, and every window, door and trim joint is re-caulked with an elastomeric sealant.
Bare stucco and block get a masonry conditioner; bare wood and metal get the primer matched to that substrate. Nothing bare goes straight to topcoat.
Windows, pool cages, screen enclosures, lighting, landscaping and driveways are covered before spraying, and the site is swept at the end of each day.
We spec products for Florida exposure, not for the lowest material cost. Here is the system, layer by layer, and why each layer is there.
Masonry conditioner
Penetrates and stabilizes chalky or porous stucco and block so the topcoat bonds instead of sitting on dust.
One coat on bare or chalky masonry
Wood and metal primer
Bare fascia, trim and metal fail first in salt air; the right primer is what stops the rust bloom and tannin bleed.
Spot or full, as the condition calls for
Body coat
UV-stable and breathable, so trapped moisture can escape the block instead of blistering the film.
Two full coats at manufacturer film thickness
Crack-prone walls
Bridges hairline stucco cracking and stays flexible through Florida's daily expansion and contraction.
Two coats where specified — used selectively, not everywhere
Trim, doors and shutters
Holds a crisp line and washes clean of salt and pollen.
Two coats
Exterior repaints in Brevard are priced by wall area, story count and — the biggest variable — how much prep the existing surface needs before anything can be coated.
Two-story walls, tall entries and homes tight against a pool cage need staging and slow the work down.
Sound stucco versus widespread hairline cracking, chalking, or failing coating is the single largest swing in the price.
Standard acrylic versus an elastomeric system on crack-prone walls.
Rotted fascia, soffit and trim is measured and quoted as its own line so you see exactly what carpentry is included.
Shutters, columns, railings, garage doors and multi-color schemes each add cut-in and masking time.
Homes east of US-1 and on the barrier island get a coating spec built for salt air, which costs more up front and lasts longer.
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Permitting & code
What Brevard HOA architectural committees ask for before an exterior repaint, and how to get a color scheme approved the first time.
Read the guidePermitting & code
When Brevard County homeowners need a permit for painting, stucco repair or pressure washing — plus who to call in unincorporated areas versus city limits.
Read the guideChambers & business
How Brevard business owners vet local contractors, and what commercial painting looks like for Melbourne-area offices, retail and multi-tenant buildings.
Read the guidePairs with exterior painting
Every exterior repaint starts with a proper wash. It is also the cheapest way to extend the life of the coating you already have.
See pressure washingLocal spotlight
Pricing, timelines and recent exterior painting projects for Palm Bay homeowners.
View Palm Bay page
“This guy knows his stuff.”
“Great work, very clean and thorough! Would highly recommend!”
“Pro Touch Painting did an amazing job! The team was professional, on time, and paid attention to every detail. The quality of their work exceeded my expectations, and they left everything spotless when they finished.”
“Pro Touch Painting is top notch!! We use them for all of our painting needs!!”
“Excellent service from start to finish. Great attention to detail, and everything looks fantastic. Highly recommend this company!”
“Very good work. Good communication and got done fast”
