Pro Touch Painting provides cabinet refinishing in Frontenac, FL with licensed, insured Brevard County crews. We inspect and prepare the surface, specify the coating system in writing, and provide a free itemized estimate. Pro Touch Painting refinishes, resurfaces and paints kitchen and bathroom cabinets throughout Brevard County, FL — doors and drawer fronts are degreased, sanded, primed and sprayed for a factory-smooth finish, typically for a fraction of the cost of new cabinets or of refacing.
Frontenac is the community along US-1 between Titusville and Port St. John, sitting right on the Indian River. Riverfront exposure brings salt-laden air and steady humidity, so exteriors on the east side of US-1 chalk and fade faster than inland Titusville homes. We wash off salt and chalk, repair stucco cracks and failing caulk, prime bare metal on doors and railings, and finish with coatings rated for coastal exposure.
Honey oak, maple and dark espresso cabinets date a Florida kitchen faster than anything else in the room. Refinishing (also called cabinet resurfacing) keeps the boxes you already have and replaces only the finish, so a full kitchen is usually done in a few days instead of the weeks a remodel or a refacing job takes — and at a small share of the price.
Riverfront homes see faster chalking and fading, so surfaces are rinsed of chlorides and coated with coastal-rated exterior systems rather than standard inland paint.
Fascia, railings and metal doors along the river rust and rot first, so those get repair, rust-inhibitive primer and extra film build before the walls are sprayed.
Cabinet refinishing in Frontenac is not the same job it would be inland. Brevard County homes deal with salt air blowing off the Indian River and the Atlantic, months of high humidity, daily summer rain and relentless UV. Those conditions shorten the life of the wrong product dramatically — and they punish shortcuts in prep even harder. A coating that fails early in Frontenac almost never failed because of the paint; it failed because the surface underneath was not clean, dry, sound and primed before the finish went on.
So we start with assessment, not with a price. We inspect the existing finish for adhesion, chalking and mildew, check for moisture and hidden water damage, identify substrate type, and flag the repairs that have to happen first — stucco cracks, failed caulk joints, soft wood, drywall damage, or slab prep on coating work. You get a written estimate that itemizes prep, products, coat count, crew size and timeline, so nothing shifts once work begins.
The work itself follows a fixed sequence: protect the space and surroundings, clean and de-gloss or wash, complete every repair, prime the areas that need it, then apply two full finish coats of premium coatings selected for Florida coastal exposure. We spray, roll or brush based on what the surface calls for rather than what is fastest, and we hand-cut lines for a crisp edge. Nothing gets signed off until we have walked the job with you and touched up anything you point out.
Practical details matter as much as the finish. Our Frontenac crews are licensed, insured and background-checked, arrive when we said we would, cover and mask thoroughly, and clean the site daily instead of at the end. You will have one point of contact for the whole project and a written 2-year warranty on workmanship. Free estimates are available across Frontenac and the wider Space Coast, and every homeowner is welcome — including LGBTQ+ families.
Doors and drawer fronts are removed, labeled and cleaned of years of cooking grease — the step that decides whether paint bonds.
Every surface is scuff-sanded and coated with a bonding primer made for slick factory finishes and raw oak grain.
Doors are sprayed off-site or in a controlled area in thin, even coats, so there are no brush marks or roller texture.
Hardware goes back on, doors are re-hung and aligned, and your kitchen is left clean and usable.
What was actually prepped, primed and coated — the same detail that goes in your written estimate.
Cabinet refinishing · Central Viera, Viera, FL
Doors and drawer fronts were removed, labeled and degreased, then sanded and bonding-primed before spraying. Boxes and face frames were masked and sprayed in place, hardware holes were kept clean, and the kitchen was back in use each evening.
Cabinet refinishing · Wickham Road corridor, Melbourne, FL
A two-tone refinish: perimeter cabinets sprayed a warm white and the island sprayed navy. Grease was cut with a degreaser first, every door was scuff-sanded and bonding-primed, and the finish was sprayed for a factory-smooth surface with no brush marks.
Prep is the part of the job you never see once we are gone, and it is the only reason a finish lasts in Brevard County's heat, salt and humidity. This is the sequence we follow on every cabinet refinishing job — it is written into your estimate, not left to chance.
Every door, drawer front and piece of hardware is removed, labeled and bagged so it all returns exactly where it started.
Doors around the range carry years of cooking oil. They are cleaned with a dedicated degreaser and rinsed — this single step decides whether the finish bonds or peels at the handles.
Doors, drawer fronts, boxes and face frames are scuff-sanded so the primer has tooth. Factory clear coats are slick; primer alone will not hold on them.
Dings, old hardware holes and grain that will telegraph through are filled and sanded flat. Open-grain oak is grain-filled when you want a fully smooth look.
Countertops, appliances, backsplash and floors are masked and the work area is put under containment with filtered ventilation before any spraying starts.
Doors are sprayed flat on racks and left to cure; boxes and face frames are sprayed in place. Your kitchen stays usable in the evenings throughout.
We spec products for Florida exposure, not for the lowest material cost. Here is the system, layer by layer, and why each layer is there.
Cleaner
Removes the cooking film that causes adhesion failure at the handles and around the stove.
Two passes
Primer
Grips slick factory finishes and stops tannin from bleeding yellow through a white topcoat.
One to two
Finish
Cures to a hard, factory-smooth film that stands up to fingernails, cleaners and daily use.
Two, sanded between
Islands and accents
A navy or sage island against white perimeter cabinets is the most requested Brevard look and costs no extra labor beyond the color change.
Two
Cabinet refinishing is priced by door and drawer count, not by kitchen square footage — a big kitchen with simple slab doors can cost less than a small kitchen with 40 detailed doors.
The main driver. We count them on the walk and put the count in the estimate.
Raised-panel and detailed profiles take longer to sand and spray than shaker or slab.
Open-grain oak needs grain filling for a smooth finish; maple and MDF do not.
A second color means separate masking and spray sessions.
Painting inside the boxes and the shelves is optional and quoted separately.
New pulls, or filling and re-drilling for a different hole spacing, is its own line.
Call 207-812-1837 or send your project details — we'll walk the job, put the scope in writing, and start when you're ready.
Licensing & consumer
A homeowner checklist for verifying that a Brevard County painting contractor is licensed, insured and accountable before any deposit changes hands.
Read the guideChambers & business
How architectural review works across Viera, Suntree and Heritage Isle communities, with a submission checklist that keeps a repaint from being kicked back.
Read the guideReal estate & value
How Brevard County assesses property condition, and which painting projects actually move appraised value and buyer perception on the Space Coast.
Read the guidePairs with cabinet refinishing
Refinished cabinets make surrounding walls and trim look tired. Most kitchens get both in the same visit.
See interior paintingLocal spotlight
Pricing, timelines and recent cabinet refinishing projects for Viera homeowners.
View Viera page
“Pro Touch Painting did an amazing job! The team was professional, on time, and paid attention to every detail. The quality of their work exceeded my expectations, and they left everything spotless when they finished.”
“Pro Touch Painting is top notch!! We use them for all of our painting needs!!”
“Excellent service from start to finish. Great attention to detail, and everything looks fantastic. Highly recommend this company!”
“Very good work. Good communication and got done fast”
“The project was completed on schedule and on budget, and they handled touch-ups promptly without any hassle once the job was done. My home now looks fresh and updated, and I've already received several compliments from friends and neighbors on how great the paint looks.”
“100% recommend. Communication on point. Very affordable! Top quality work! The project started on the agreed date and was finished on or ahead of schedule without surprise delays or unexplained gaps in work!”
